admin 
Wallpaper can renovate a room, adding color, texture, and personality. However, installing it can be tricky. To ensure a smooth, professional-looking finish, here are the top five hacks for wallpaper installation Dubai you need to know.
Prepare your walls properly
The success of your wallpaper installation largely depends on the preparation of your walls. Start by cleaning the walls thoroughly to remove any dust, dirt, or grease. Fill in any cracks or holes with suitable filler and sand the surface smooth. Ensure the walls are completely dry before applying wallpaper. For optimal adhesion, consider applying a primer designed for wallpapering. This will help the wallpaper stick better and make removal easier if you decide to change it in the future.
Measure and cut accurately
Accurate measurement and cutting are vital for a smooth installation. Measure the height of your walls and add a few extra inches to each strip of wallpaper to account for trimming. Use a sharp utility knife or wallpaper scissors to cut the strips. Ensure to match patterns if your wallpaper has a repeat design. Lay the strips out on a flat surface and align them carefully before cutting. This will prevent mismatches and ensure a more precise fit.
Use a wallpaper paste roller
Applying paste evenly is essential for good adhesion. Instead of using a traditional brush, consider using a wallpaper paste roller. This tool helps to spread the paste more uniformly and reduces the risk of lumps or bubbles. Apply a thin, even coat of paste to the wall, focusing on the edges where the wallpaper will adhere. For pre-pasted wallpaper, dampen the back of the wallpaper according to the manufacturer’s instructions before applying it to the wall.
Smooth out bubbles and wrinkles
Air bubbles and wrinkles can ruin the appearance of your wallpaper. To avoid this, use a wallpaper smoothing tool or a clean, dry cloth to press the wallpaper gently against the wall. Start from the center of the strip and work your way outwards to push out any air bubbles. For stubborn bubbles, use a pin to prick them gently and smooth them out with the smoothing tool.
Trim and finish neatly
Once the wallpaper is in place, trim the excess carefully. Use a sharp utility knife to cut along the edges where the wallpaper meets the baseboards, ceiling, and corners. A straightedge or ruler can help guide your cuts for a cleaner finish. After trimming, press the edges firmly against the wall to ensure they stick well.
